|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Like to change my oil bath air filter on the 235 for something with a dry element. I don't want one of those small chromed and louvered types but something a bit bigger about 9 or so inches in diameter. Where can I get one?
|
|
#2
|
||||
|
||||
|
This should do the trick: http://www.ebay.com/itm/2-TWO-4-FOUR...sories&vxp=mtr and this http://www.ebay.com/itm/ERSON-10-10X...805b6f&vxp=mtr
|
|
#3
|
|||
|
|||
|
Those are tough to get air cleaners on. They have a funny lip and i don't know of any aftermarket aircleaners that work. I made some by riveting like a flattened 'loop' to the bottoms of an aircleaner and the loop held captive a large hose clamp. The hose clamps dropped down far enough to get on the bottom side of that funny ring they have around the 1 barrell carbs.
If you look close you can barely see the hose clamp. This was done to mount the chrome cups but any cleaners can be adapted to the carb by doing the same technique. |
![]() |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|




Linear Mode
